How To Buy And Install 8 Inch Diesel Exhaust Tips

 

Are you looking for buy 8 inch diesel exhaust tips for your car? While installation of exhaust tips is  considered a bit of a niche upgrade,  you may be wondering if it is really worth it. The exhaust tips are more of  a cosmetic addition, but they are definitely good to have on your car because they will improve its appeal.

When choosing the right exhaust tips for your car, there are various factors you need to consider. One of them is the length of the exhaust tip. On applications where it is possible to do so, such as motorcycles and ATVs, lengthening the pipe by as little as 6” can drastically affect exhaust note. Doing so will give high frequency waves more opportunity to cancel out, something that will allow the long, low frequency waves to escape.

Another factor you need to consider when looking for the right 8 inch diesel exhaust tips for you vehicle is installation. When installing an exhaust tip with any kind of kick-out, you should try experimenting with the position before settling on one. Tips designed for round tubing can easily be rotated by loosening the retaining screws and turning them.

Many engines sound better with down-turned tips, but you can try rotating the tip to face outward, upward, and even inward so as to see what it sounds like before installation. After every adjustment, you should walk around the car while a friend revs the engine.

A turned-out tip will be much louder from the sides while an inward turned tip will move the sound dispersion further back so that it is only really loud when a person is standing next to the rear bumper. In case you would like to increase or decrease the sound, you can try rotating the tips so that they are at a 45-degree angle to the ground.

For more tips on how to buy and install 8 inch diesel exhaust tips, visit our website at https://puredieselpower.com/

 

 

A Look At The Ppump Conversion Parts That You Should Consider Purchasing

 

If you are looking for the right ppump conversion parts for your diesel engine, you need to look for the right place to purchase them.  You need to look for a place where you can find everything you need to swap your VP44 for a P7100 or "P Pump".  They should be offering conversion injection lines, timing gear case housings, intake plenum covers and bolt kits, 24V P-Pump APPS kit, injection pump support bracket mounting kits, tach sensor relocation brackets, Cummins injection pumps gears, oil feed lines, throttle linkages and throttle cable kits.

One of the ppump conversion parts that you may find to be useful is the crazy carls p-pump conversion kit. This is one of the complete kits available. It has all the components you need to install a P7100 on a 98-02 24 valve Dodge Cummins engine. It is highly recommended that you use only STEEL lines on a street application. Stainless steel lines are brittle and can easily crack in a daily-driving application. Among the things you will find in the crazy carls p-pump conversion kit include pump gear, gear housing,  mounting studs and nuts, crank seal, housing gasket as well as vacuum pump kit. However, this kit does not include fuel shutoff/shutdown solenoid, P7100 injection pump and fuel feed & return lines.

Another of the ppump conversion parts that you will find useful is the P44 to P7100 injection line conversion kit without intake spacer plate. This kit includes lines clamped together, mild steel available in         .078, .084,  .093, stainless steel available in  .093 and .120, But it does not include intake spacer plate.

For more information on the ppump conversion parts that you should consider purchasing for your vehicle, visit our website at https://puredieselpower.com/