How To Maintain Cummins Injectors

 

Do you have a vehicle that uses cummins injectors? If you want these injectors to last, you need to know the right way to take care of them. Clean, well-functioning fuel injectors are very crucial when it comes to getting the most efficient performance and mileage from your diesel engine. For minor clogs and maintenance, adding a diesel fuel additive to your tank can be a great solution. But if you have more serious clogs, you may have to use a diesel fuel cleaning kit in order to clear any harmful buildup out of your fuel injectors.

Fuel additives can make your engine cleaner, but you need to know how to use them properly to be able to get good results. It is important to make sure that the engine is turned off and the fuel tank is almost empty before using the additives. Also make sure that the engine is not actively burning fuel before you put any additives in your tank. You also want to add fuel additives to a tank that is close to empty to allow the additive to travel through the fuel system at a concentration high enough to clean it.

Keep the engine off and remove the key from the ignition. Go ahead and locate and open the vehicle’s fuel tank. For most cars, there is a cap to access the fuel tank on the left or right side of the rear of the car. However, some trucks and other engines can have a fuel cap in a different location. You should look for a cap that has the symbol of a gas pump handle and then remove the cap to access the fuel tank. Chances are you may need to open a hatch in order to get to the gas cap, and some vehicles may need you to pull a lever near the driver’s seat to release the hatch.

For more tips on how to maintain cummins injectors, visit our website at https://puredieselpower.com